SPCC steel is produced by subjecting hot rolled steel to a cold rolling process, which not only improves its surface finish but also enhances its mechanical properties.

ASTM A588 steel is classified into Class A, Class B, Class C, and Class K. The ASTM A588 steel specification is based on the standard specification for high-strength low-alloy structural steel with a lower yield point of up to 50ksi for applications requiring high strength and corrosion resistance.

ASTM A573/A573M grades include 58, 65 and 70. Steel plates are suitable for structural carbon-manganese-silicon steel plates with three tensile strength ranges. ASTM A573/A573M steel plates are mainly used to improve notch toughness at room temperature.

1023 cold rolled steel plate is made of low-carbon alloy steel designed for use in applications that require excellent machinability and formability. This type of steel comes with outstanding weldability and machinability, making it an ideal choice for various applications. Its composition mainly includes iron, carbon, and manganese.

1045 is a medium carbon steel is used when greater strength and hardness is desired than in the "as rolled" condition. Extreme size accuracy, straightness and concentricity combine to minimize wear in high speed applications. Commonly used in gears, shafts, axles, bolts, studs and machine parts.

DC01, DC02, DC03, DC04 are steel grades of European standard DIN EN 10130, 10209 and DIN 1623, which are specified cold rolled steel. The grades are classified according to the maximum permissible yield strength.

Stainless Steel I beam steel is a new type of economic construction steel. Economic and reasonable h-beam section shape, good mechanical performance, rolling section on each extension point is relatively uniform, small internal stress, compared with ordinary beams, with large section modulus, light weight, save metals etc.. mainly used for large buildings that big cutting ability, good cross section stability (such as factories, high-rise building, etc.), and Bridges, ships, lifting transportation machinery, equipment foundation, support, foundation pile, etc.

Stainless Steel I beam steel is a new type of economic construction steel. Economic and reasonable h-beam section shape, good mechanical performance, rolling section on each extension point is relatively uniform, small internal stress, compared with ordinary beams, with large section modulus, light weight, save metals etc.. mainly used for large buildings that big cutting ability, good cross section stability (such as factories, high-rise building, etc.), and Bridges, ships, lifting transportation machinery, equipment foundation, support, foundation pile, etc.

Angle bar also referred to as an angle iron or L-bracket, is a finished metal part in a right angle shape, with perpendicular legs that may be equal or unequal in length. It is typically manufactured through hot rolling carbon steel or a high-strength, low alloy steel that is highly ductile and machinable. Due to the versatility of this product, angle bar uses can be found in many situations. Some of these include bridges, building construction, shelving units, warehousing, or even equipment manufacturing.

H beam is widely used in beams and columns of industrial and civil steel structures. Steel structure load-bearing supports for industrial structures. Ship and machinery manufacturing frame structure. Steel piles and supporting structures of underground works.

Stainless Steel I beam steel is a new type of economic construction steel. Economic and reasonable h-beam section shape, good mechanical performance, rolling section on each extension point is relatively uniform, small internal stress, compared with ordinary beams, with large section modulus, light weight, save metals etc.. mainly used for large buildings that big cutting ability, good cross section stability (such as factories, high-rise building, etc.), and Bridges, ships, lifting transportation machinery, equipment foundation, support, foundation pile, etc.

Channel steel is a long strip of steel with a groove-shaped cross-section. It is a carbon structural steel for construction and machinery. It is a section steel with a complex section and its cross-section is a groove-shaped. Channel steel is mainly used in building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.

Stainless steel wire, also known as stainless steel wire, is a variety of silk products of different specifications and models made from stainless steel as raw material. It originates from the United States, the Netherlands, and Japan, and generally has a circular or flat cross-section. The common stainless steel wires with good corrosion resistance and high cost-effectiveness are 304 and 316 stainless steel wires.

Stainless steel wire, also known as stainless steel wire, is a variety of silk products of different specifications and models made from stainless steel as raw material. It originates from the United States, the Netherlands, and Japan, and generally has a circular or flat cross-section. The common stainless steel wires with good corrosion resistance and high cost-effectiveness are 304 and 316 stainless steel wires.

Stainless steel wire, also known as stainless steel wire, is a variety of silk products of different specifications and models made from stainless steel as raw material. It originates from the United States, the Netherlands, and Japan, and generally has a circular or flat cross-section. The common stainless steel wires with good corrosion resistance and high cost-effectiveness are 304 and 316 stainless steel wires.